Due to the dip in economy we are trying to do most of our shipping Tues thru Thurs.  So if you are calling on Fri, Sat,  Sun or Mondays we may or may not be here to answer the phones.

          SHIPPED within 4 business days

Hot weather is coming, if you want to save up to hundreds of dollars a month off your air conditioning expenses, then you want to put 1 mil or 2 mil in your attic.  This is what you can expect, your air conditioning season will not start for a month after everyone else, it will end a month earlier, and your air conditioner will run a short time and kick off for an equal amount of time rather than running all day long. This is very simple to install in houses with an attic or crawl space. When installing leave air gaps at the top so the heat can rise out, and at the bottom between passes to promote ventilation and an escape for the hot air, this way your attic will not rise to 3 digit numbers. Because the crawl space gets so hot without a heat barrier your air conditioner will not turn off.  Our product is a radiant heat barrier, metalized on both sides, unavailable any where else.  How much do you spend on air conditioning? Wouldn't it be nice to cut that by 60% or 70%. 

email: snomo2@comcast.net, or snomo@snomo.com

CALL TO ORDER or use PayPal Checkout System

ORDER FORM BELOW

Who are we:  We are Niel and Sheri Nielsen. We have been in the business of selling mylar and mirror sheeting films wholesale to stores for 25 years.  We saw a need for the public to make mirrors for dance studios, use mirror sheeting in solar applications, and insulate windows and walls to conserve energy.  We decided to start selling our films directly to the public.  We wanted to maintain our small family business status, as we are a husband and wife team.  We are raising 4 children and sometimes are not able to make it to the phone so please do not be discouraged if we miss your call. We do check our email everyday, and find it the easier way to communicate.  Thanks for doing business with us, and helping us to stay afloat in these hard times.

__________________________________________________________________________________________________________

SAMPLES

Option 1: Send a self addressed stamped envelope (business size, No. 10, 4"x 9") the size you get your bills in....with 1 stamp on it, .and ($3.00)  for samples of 1, 2, 5 & 7 mil. ADD 50 CENTS APIECE FOR 3 MIL LIGHT OR CLEAR WITH A NOTE DETAILING WHICH SAMPLES YOU WANT.

 

SEND TO: Nielsen Enterprises 3019 S. 256th ST.        253 941-7425         Kent, WA. 98032

Or you can order them below.

Option 2: Order online below for $5.00 without sending the envelope and postage.

 

Samples 1, 2, 5 & 7 mil      $5.00  includes shipping

no additional shipping

_______________________________________________________________________

MAKING MIRRORS

In order to make a mirror, it is critical that the mirror sheeting be as flat as possible. People have had varying success with different strategies of doing this, a few of which we have described below. Feel free to give these ideas a try, or try your own.

If you decide to make a mirror, the first step I suggest is ordering samples. You need to be able to make the mirror flat, so choose a type of sheeting that you think you can accomplish this with or you will get distortion in the reflected image. The mirror sheeting does scratch easily, so you need to clean it with a polishing cloth and lemon pledge, or you can cover it with the extra clear film.  

Some people use thin material and stretch it on a frame, the end result of which is similar to "mylar mirrors" on frames that usually sell for about $600.00 on the web. Others use the thicker film and tensioners (can be ordered below) to mount it. Some recommendations regarding this procedure can be found at the link here: Instructions for a portable mirror on a frame.

Tensioner Used for Creating a Mirror on a Frame

We have recently been experimenting with using wooden dowels (about 1" diameter) on the top and bottom edges of a piece of mirror sheeting to create a mirror. This process is easier than using tensioners and has produced generally good results.                                 

Tensioners  for Making Mirrors  

These make it possible to construct a mirror by pulling the four corners tight. It includes an eyelet screw that goes into the wall and a clip that bites into the mirror sheeting and an adjuster with a wing nut to apply tension. You will need one on each corner to  pull the sheeting tight.   Includes: 1 eyelet screw, 1 adjuster with wing nut, and 1 clip. You can put this in a stud in the wall, or for a portable mirror screw it into a frame made of PVC pipe.

______________________________________________________________

ORDER FORM FOR MIRROR SHEETING

_____________________________________________________________________________________________________________________________ 

      Note on "mil" measurement: 1 mil = 0.001 inch [international, U.S.], same unit used for garbage bags      

*Please include your phone number with Paypal orders for the UPS mailing label.

1 MIL  Thick  SILVER (Coated both sides):  Frame it for mirrors, needs to be pulled tight. Good for Hydroponic Gardening.                              

1 mil x 48"		1 mil x 56"
10 ft 1 mil x 48"    $11.00		10 ft 1 mil x 56"    $13.00
25 ft 1 mil x 48"    $17.00		25ft 1 mil x 56"     $19.00
50 ft 1 mil x 48"    $27.00		50 ft 1 mil x 56"    $31.00
100ft 1 mil x 48"   $46.00		100 ft 1 mil x 56"  $53.00

__________________________________________________________________________________________________________

 2 MIL Thick SILVER (Coated both sides): Easier to work with than 1 mil.  Same coating.  

2 mil x 48"		2 mil x 56"
10 ft 2 mil x 48"    $18.00		10 ft 2 mil x 56"    $21.00	out of stock
25 ft 2 mil x 48"    $27.00		25 ft 2 mil x 56"    $32.00	out of stock
50 ft 2 mil x 48"    $44.00		50 ft 2 mil x 56"    $52.00	out of stock
100 ft 2 mil x 48"    $78.00		100 ft 2 mil x 56"    $92.00	out of stock

_______________________________________________________________________________________________________   

5 MIL SILVER (Coated both sides): Great for making mirrors. Can scratch if rubbed too hard, must be cleaned with lemon pledge and a polishing cloth or cotton diaper, not terry cloth or paper towels. Only available in 48".  

	5 mil x 48"
	10 ft 5 mil x 48"    $45.00
	25 ft 5 mil x 48"    $76.00
	50 ft 5 mil x 48"    $137.00
	100 ft 5 mil x 48"    $236.00

________________________________________________________________________________________________________

5 MIL SILVER (Coated on one side): This film is not good for mirrors, you can see thru you can see through it with effort (although it is very dark). Might be used for windows  for reflecting the sun's damaging rays and keeping your home cooler, reducing your air conditioning costs.  During the winter even expensive windows transfer cold air into your home and increase your heating bill. Insulating windows with this product can minimize this. Only available in 35 1/2" width.

5 mil x 35 1/2"
10 ft 5 ml x 35 1/2"  $33.00
25 ft 5 ml x 35 1/2"   $60.00
50ft 5 ml x 35 1/2"   $ 112.00
100 ft 5 ml x 35 1/2"     $196.00

_________________________________________________________________________________________________________

7 MIL SILVER (COATED on BOTH SIDES): Very Reflective. Great for mirrors or windows (cannot see through).  Most durable against scratches. Always clean with a cloth diaper or polishing rag and Lemon Pledge. NO PAPER TOWELS OR TERRY CLOTH.

7 Mil x 56"
10 ft 7 ml x 56"  $66.00
25 ft 7 ml x 56"  $114.00
50 ft 7 mil x 56" $216.00

_________________________________________________________________________________________________________

 SPECIAL ONE SIDED WINDOW FILMS (SEE THROUGH)

3 Mil See through---Light-SILVER Titanium COATED ON ONE SIDE: CAN SEE THROUGH ONE WAY, can double it to make it darker, and for one way mirrors. GREAT FOR WINDOWS  3 MIL THICK X 28 1/2 or 37 1/2" wide. 

We got a special over run deal on this window film, it is normally 30 times higher cost to us, so we have passed that savings on to you.  When it is gone, there is no more.     

3 mil x 37 1/2"
10 ft 3 ml x 37 1/2" Light  $35.00
25 ft 3 ml x 37 1/2" Light $66.00
50 ft 3 ml x 37 1/2" Light $110.00
100 ft 3 ml x 37 1/2" Light $191.00

________________________________________________________________________________________________________

Clear 2 mil  (CLEAR): Very clear, great for storm windows. Works best if applied on a framework with an air gap. You can see through this film like glass, not that cloudy stuff you buy at home depot. You can also use it over other mirror sheeting to protect it from scratching and dirt.   Makes a green house effect, so it can also be useful for indoor gardening.  I have 3 rolls of 25ft 48" wide call.

2 mil x 48" Clear		2 mil x 56" Clear
OUT		25 ft 2 ml x 56" Clear $30.00
Have 3 rolls call 25ft.		50 ft 2 ml x 56" Clear $48.00
		100 ft 2 ml x 56" Clear $86.00

 *Please include your phone number for the UPS mailing label.

__________________________________________________________________________________

These are discounted prices for high quality mirror sheeting and are subject to

changes. Orders over $700.00 get 10% off (Call for discount).

Orders can be made by phone: Call with credit card to Nielsen Enterprises at (253) 941-7425 

By mail: send check or money order to Nielsen Enterprises, 3019 S 256th ST, KENT, WA 98032

Online via paypal:  Click on the View Cart button above. Paypal account is snomo@snomo.com

____________________________________________________________________________________

Shipping and Handling charges for UPS Ground Service Single Roll orders

Shipping can be higher if you order multiple rolls, and we need to ship multiple boxes, especially on the 1/2 mil prices.  If the widths are the same on different films, we can roll one over the top of the other to fit in one box.

8.8% Sales Tax will be charged for orders in Washington State.

I no longer ship outside the US, it costs too much  for shipping out of the country. Sorry for any inconvenience this may cause.

________________________________________________________________________________________________________

ADDITIONAL INFORMATION AND TESTIMONIALS

Daycares, Mothers, put this on your wall, and let your children draw on it with erasable markers, or even crayons, while watching themselves, then clean with a diaper and mild soap, and let them do it again and again.  Protect your walls while enhancing your child's imagination.

Wives put it in your shower for your husband to shave with.  Less mess, fast and done.

NOTHING on this planet is MORE reflective or cost effective than OUR mirror sheeting!! White paint doesn't compare! You'll receive FREE light from your walls, a 30% faster growth rate in your hydroponic garden, highest quality guaranteed.

Our 1, 2, 5 and 7 mil, are mostly opaque, and you cannot see thru them. Our 3mil is metalized only on one side, with a smoke color tint, shiny on the metalized side, great for windows, adding privacy, and reducing the heat from the sun, cutting air conditioning costs.

Our 2 sided mirror sheeting is one of the most reflective products on the market today.

You get a perfect mirror quality reflection from our 5 mil product, its the Premier film on the market today!

We are #1 in customer satisfaction around the world, and nobody beats our price for quality material, we wont sell junk film.

People have been finding all kinds of new ways to use our mirror sheeting.

The top  applications are:

1. INSULATION IN HOUSES (used on rafters, in attics, on windows, and as a house wrapping for moisture barrier.) NOTE* When working in your attic, especially a hot one, it is important to check periodically for any condensation.  When hot air meets cold moist air, it causes condensation in the wee hours of the morning. If this is happening in your attic then you will need to add ventilation with fans, or vents. Fans would be the best choice hooked to a thermostat and a timer set to come on if it gets to a high temp, expelling the heat, and by a timer periodically to prevent any condensation that might cause mold, mildew, or rotting. 
2.  WINDOW SHADES TESTIMONIALS OF REDUCING THE HEAT IN A 3RD STORY OFFICE BUILDING IN CALIFORNIA BY 20 TO 25º

(the mirror sheeting should not be attached to the window for permanent installation, because the shiney (metallized side) will start to break down after a year or so if you have sweaty windows, you should  put it on a roller or leave an air gap) A thick double backed tape works well, attached to the frame of the window , leaving a small air gap between the film and the window, if you don't want to make roller shades.  Just put it on the corners, and pull tight to make the film flat. You can see thru the single sided film, and it acts like a one way mirror when you have the sun shining on it from the outside, giving you added privacy.

We also carry clear for storm windows in the winter.

Double sided film cannot be seen through, great for privacy, and total blocking of the sunlight.  We also have a one-sided metallized coating designed to allow you to see your view, while blocking sun rays, preventing fading and sun damage to your house, still reducing the temperature in your house in the summer months and insulating against the cold in the winter, saving  you money on your energy bills.

Hey!  RV/HOME OWNERS/SNOWBIRDS ETC IN AZ, TX, FL, AND ANYWHERE ELSE THAT IT IS SO  DARN HOT! Feel the heat on your rv roof now, then I challenge you all to try our product by putting some 1, 2, 5, or 7 mil. over anything that gets hot from the sun, especially your roof.  Its like being in the shade, you could just lay some down over your roof, securing it with double back mounting tape, trimming out or around vents, air conditioning units etc.  Anything that gets hot by the sun will be cured of that, boom!  Or you could build a framework, that can be removed, and attach it to it.  Heat from the sun completely bounces off the film before your roof can get hot. The film never gets hot and it is a water vapor barrier, also besides being a radiant heat barrier.  Use the 1 mil in your attic, or crawl space, on the floors and rafters, leaving a 1/2 to 1 inch air gap between passes, so it can breathe.  Maybe an attic fan would be another good idea, in reducing your attic temp. which boils down to your being to darn hot! If you have new construction, put the 1mil behind your drywall everywhere, that is probably one of the best things you can do, for significant savings.  It is an absolute must for cabins, and ice fishing huts, anything that needs insulation for hot or cold. The propane heater heat actually bounces off the walls, and seals out the cold making you warmer. If you think you are hot, what about your mom, dad, grandparents and others you love.  Buy them some 3 mil window film, it is one sided metallized, with a smoke tint, that mounts easily with a thick double backed mounting tape, on your window frame, leaving a small air gap between the glass and the film. Or adhere it to an existing roller shade, for the ability to put it up and down on desire. It adds privacy, because the people looking in, see mirror, and you looking out, see a tinted world. Your loved ones will feel loved, as there lives are more comfortable, and you will save money in your heating and cooling needs.  

5 and 7 mil, are the perfect choice for making a mirror out of your walls, or doors, even floors and ceilings. Popular for the proms, making dances more exciting, photography studios, day cares, fitness and dance studio's, solar buffs, and contractors  love our products.

PLEASE EMAIL ME WITH YOUR TESTIMONIALS TO ADD TO MY WEBSITE.

1. REFLECTS HEAT AND LIGHT IN HYDROPONIC GROWING
2. STRIPS IN FRUIT TREES TO PREVENT BIRD INFESTATION
3. HEAT DEFLECTOR USED IN AUTO'S, BOATS, PLANES, SNOWMOBILES, ETC.
4. FISHING LURES
5. WINDOWS TO DEFLECT THE DAMAGING SUN RAYS
6. SAFE BABY MIRRORS
7. REFLECT HEAT AWAY FROM PET CAGES
8. EMERGENCY BLANKETS (HELPS TO MAINTAIN BODY HEAT)
9. OUT DOOR GARDEN HOOD AROUND INDIVIDUAL PLANTS TO INCREASE SUN INTAKE ON (TOMATOES ETC.)
10. CHRISTMAS WRAP (REFLECTS TREE LIGHTS, WRAP WITH RED RIBBON FOR BEAUTIFUL EFFECT.
11. CHRISTMAS TREE BLANKET (a reflective base to emphasize those beautiful lights)
12. DANCE FLOORS, KIDS GO WILD!!!
13. PHOTOGRAPHY
14. PUT ON THE BACK OF YOUR FISH TANK. MAKES IT SEEM LARGER AND INCREASES YOUR LIGHTS EFFECTS. Makes lonely birds sing with joy of friendship.
15. ANTI STATIC CAPABILITIES
16. GROUND STRIP FOR YOUR CAR TO STOP THOSE ANNOYING STATIC SHOCKS
17. SOLAR APPLICATIONS 
18.   If you want to check out his website for a lot of solar info it is www.redrok.com    
19. read testimonial at bottom of page  Never leave solar materials unattended in the sun, it can cause a fire, it is a powerful tool and must not be pointed toward anything not intended, as damage will occur.  It gets very hot.

** Insulation in Houses - In the southern states where attic temperatures are very hot (120+degrees) air conditioners work extremely hard to over ride the presence of extreme heat above, trying to "bake" the living space of your home. Our film separates the two temperature zones, protecting your living space, allowing the air conditioner to work more effectively. Heat in the attic is reflected back up through attic vents, hence a big difference!! You will be amazed. In the north where it is cold, the opposite occurs. Your heater or wood stove creates heat that rises trying to escape. Cold air in you attic absorbs this heat. Our film again separates the two temperature zones reflecting the heat back down to your living space, keeping your home warmer or cooler for less money.  Important.....  How to:  Put on perpendicular to joists, that is a 90 degree angle, leaving a 1/2 to 1 inch air gap between passes.

You can expect lower air conditioning, and lower heating bills. Our film is inexpensive and you can install it yourself. 

________________________________________________________________________________________________

Cleaning the mirror sheeting

It is recommended that cleaning be done with a cloth diaper.

A mil is .001 of an inch, a measurement used to measure your garbage bags.

That is 1000th of an inch.

All thickness's can be cut with scissors or razor knife

Storing Film-- it must be kept away from humidity when on the roll, and should be used as soon as possible after you get it. If exposed to condensation  while on the roll it will peel.  

All our films are metallized  polyester film,  as with any metallized film care should be given to never allow it to come in contact with exposed live electrical wires, or sources, it can cause fire, and or electrocution. To avoid suffocation do not allow any small children to play with any plastic that may be able to suffocate a child.

For quotes on Dupont Mylar® films please email or call us.  snomo@snomo.com  253 941-7425

• Note: Shipping and handling charges added to all orders:

 

We accept all major credit cards by phone, or send check or money orders to:

Nielsen Enterprises, 3019 S 256th St, Kent, WA  98032

We will hold checks 10 days to clear.

• Special Wholesale Offer
• ORDERS OVER $700.00 GET 10% OFF.
•  
• Prices are subject to change without notice:
                                                

Email Address: snomo@snomo.com 

(We also rent a vacation mountain house and snowmobiles.)

*Mylar® is a registered trademark of Dupont Tiejin films.

We accept: Visa, Discover, American Express and MasterCard

Return Policy:  NO RETURNS, GET SAMPLES FIRST AND MAKE SURE IT IS WHAT YOU WANT BEFORE ORDERING PLEASE.

---

• 

Copyright © 1996 Nielsen's Enterprises
Last updated and maintained by Adventure's on April 25th, 2001 mrd

 

 

 

 

 

Discaimer: Nielsen Enterprises will not liable for other peoples mis use of this product and will not be held responsible for other peoples actions.  It must be kept away from electricity, it is plastic and can suffocate a child, it can impair vision if reflected to the eye, and can cause fire in solar applications.

 

Links

www.HydroponicVegetableGardening.com Learn the secrets of growing  vegetables in small spaces without soil or effort.

Solar Testitmonial:

Dear Neil and Sheri,
 
Thanks for the roll 2 mil double coated reflective Mirror Sheeting.
 
I applied it to a 1 meter (very slightly oblong) satellite dish.
 
Be advised that a 1 Meter parabolic dish so Coated is a very powerful instrument.  Treat it with respect as it could easily damage objects and humans. In theory, if your dish is well-shaped, and you hit the focal point correctly, you could 'weld-out' a hole in whatever cooking vessel you are attempting to use.  NEVER ATTEMPT TO TEST THE SWEET-SPOT OF THE DISH WITH ANY BODY PART (YOURS OR ANYONE ELSE'S) Things like large, black painted,  pieces of card-board attached to some kind of non-reflective stick should be used until you have a very, very good idea of what the power of your particular set-up is.
 
Mine brought about a half-gallon of water from about 70 degrees to boiling in about 35 minutes. This occurred at two hours before astronomical-noon, on Aug. 3  (Cross-quarter between summer-solstice / autumnal-equinox. )
 
The pan itself began to immediately smolder (Old cooking oil burning off) before I added the water.
 
 
 
Here are my coating instructions (roughly)
 
Prepare the dish :
 
Mine was a wire mesh with 'bumply' plastic all over it. 
    1. Wash, scrub, rinse and dry the dish.
    2. Apply two coats of sandable primer.  (each coat goes down just thick enough to appear wet and is allowed to dry about 25 mins before the next coat.)
    3. Allow 24 - 48 hours for the primer to dry.
    4. Wet sand the paint (Approx. 400 grit wet/dry paper)
    5. Allow water to dry.  (probably an hour or so.)
    6. Repeat 2 - 6 until the 'bumplies' are gone.  (filled in by the primer.)
 
 
Cut several 3-4" wide strips of the Mirror Sheeting.
 
Partition the dish:
 
Using a thin coat of basic Elmer's glue,  apply strips of the Mirror Sheeting (cut to an appropriate length -- save the scraps)  so as to partition the dish into 8 pie shaped triangles.  Use a wall paper edge roller gently to smooth out the bubbles.  While not worrying too much about glue-slop along the edges of the Mirror Sheeting (we'll dab these up later),  try to be kind of neat.
 
Edge the dish:
 
Add 8 strips along the outside perimeter of the pie-shaped pieces so as to make 8 triangles.
 
I generally overlapped by less than half an inch.  (Closer to a quarter)
 
 
Fill in each of the triangles with still more strips cut to size.
 
 
Get rid of the glue slop:
 
I found that a slightly damp handiwipe in one hand followed immediately by a Kleenex used to buff and dry in the other seemed to work.  (Karate Kid, "Wax on, Wax Off".  The idea here is to not go deep.  Only to 'lick', the glue off of the surface.  Pushing too hard tends to scratch and discolor the silver coating.  You will need to rinse and ring out your handi-wipe often as it fills with glue.  Be patient.  I did two passes.  One to pull the heavy stuff, and then one for the details, polishing.
 
 
Allow the glue to dry / set up.
 
 
 
One day, hopefully, I'll be sending along pictures.
 
Thanks again.
 
Regards,
Richard R. Kusaba
Kemmerer, WY

_______________________________________________________________

 

Hi,

 

I had bought some mylar last year and used it on a solar dish.

 

You can see it here: www.ultralightbuilder.com

 

Thanks,

 

Mark Nichols

 

 



______________________________________________________________________________

 

  
Hi again, Niel and Sheri,

My oven itself is now done; just needs a couple of minor enhancements;

and some paint. The last picture shows what it looks like with your

reflective foil: www.williamgbecker.com/MakeSolarOven.html.

It reaches a steady 400 degrees while cooking the pot of beans you see

there.

Best,

Bill Becker